Forschung
Publikationen

Publikationen des Institutes für Maschinenkonstruktion und Tribologie


Zeige Ergebnisse 1 - 20 von 120
1 2 3 4 5 6 Last

2021


Behrens, BA, Maier, HJ, Poll, G, Overmeyer, L, Wester, H, Uhe, J, Hassel, T, Pape, F, Lammers, M, Hermsdorf, J, Kaierle, S, Budde, L, Saure, F, Mildebrath, M, Coors, T, Faqiri, MY & Büdenbender, C 2021, 'Influence of degree of deformation on welding pore reduction in high-carbon steels', Production Engineering, Jg. 15, Nr. 2, S. 161-168. doi.org/10.1007/s11740-020-01009-z

Li, X, Guo, F, Poll, G, Fei, Y & Yang, P 2021, 'Grease film evolution in rolling elastohydrodynamic lubrication contacts', Friction, Jg. 9, Nr. 1, S. 179-190. doi.org/10.1007/s40544-020-0381-4

Liu, H, Zhang, B, Bader, N, Venner, CH & Poll, G 2021, 'Scale and contact geometry effects on friction in thermal EHL: twin-disc versus ball-on-disc', Tribology International, Jg. 154, 106694. doi.org/10.1016/j.triboint.2020.106694

Schneider, V, Liu, H, Bader, N, Furtmann, A & Poll, G 2021, 'Empirical formulae for the influence of real film thickness distribution on the capacitance of an EHL point contact and application to rolling bearings', Tribology International, Jg. 154, 106714. doi.org/10.1016/j.triboint.2020.106714


2020


Bader, NF & Poll, G 2020, Investigation of Traction Experiment Set Up on the Resulting Traction Curves and Fluid Properties Derived from such Measurements. in 61. Tribologie Fachtagung 2020, 61. Tribologie-Fachtagung 2020 Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendungen, Gesellschaft für Tribologie e.V.

Behrens, BA, Maier, HJ, Poll, G, Wriggers, P, Aldakheel, F, Klose, C, Nürnberger, F, Pape, F, Böhm, C, Chugreeva, A, Coors, T, Duran, D, Thürer, SE, Herbst, S, Hwang, JI, Matthias, T, Heimes, N & Uhe, J 2020, 'Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing', Production Engineering, Jg. 14, Nr. 5-6, S. 569-581. doi.org/10.1007/s11740-020-00992-7

Breidenstein, B, Denkena, B, Krödel, A, Prasanthan, V, Poll, G, Pape, F & Coors, T 2020, 'Production-related surface and subsurface properties and fatigue life of hybrid roller bearing components', Metals, Jg. 10, Nr. 10, 1339, S. 1-17. doi.org/10.3390/met10101339

Coors, T, Pape, F & Poll, G 2020, Concept for enhancing machine elements by residual stresses and tailored forming. in 26th International Association for Management of Technology Conference, IAMOT 2017. 26th International Association for Management of Technology Conference, IAMOT 2017, International Association for Management of Technology Conference (IAMOT) and the Graduate School of Technology Management, University of Pretoria, S. 1792-1802, 26th International Association for Management of Technology Conference, IAMOT 2017, Vienna, Österreich, 14 Mai 2017.

Coors, T, Saure, F, Mildebrath, M, Pape, F, Hassel, T & Poll, G 2020, Herstellung von Großwälzlagern durch Stahl-Stahl-Werkstoffsysteme: Conference: 23. Umformtechnisches Kolloquium Hannover .

Coors, T, Mildebrath, M, Büdenbender, C, Saure, F, Faqiri, MY, Kahra, C, Prasanthan, V, Chugreeva, A, Matthias, T, Budde, L, Pape, F, Nürnberger, F, Hassel, T, Hermsdorf, J, Overmeyer, L, Breidenstein, B, Denkena, B, Behrens, BA, Maier, HJ & Poll, G 2020, 'Investigations on tailored forming of aisi 52100 as rolling bearing raceway', Metals, Jg. 10, Nr. 10, 1363, S. 1-19. doi.org/10.3390/met10101363

Coors, T, Pape, F, Kruse, J, Blohm, T, Beermann, R, Quentin, L, Herbst, S, Langner, J, Stonis, M, Kästner, M, Reithmeier, E, Nürnberger, F & Poll, G 2020, 'Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored properties', International Journal of Advanced Manufacturing Technology, Jg. 108, Nr. 7-8, S. 2409-2417. doi.org/10.1007/s00170-020-05532-2

Coors, T, Pape, F & Poll, G 2020, Untersuchungen zur Festigkeit von komplex beanspruchten Multimaterialsystemen am Beispiel von Wälzkontaktermüdung. in 23. Umformtechnisches Kolloquium Hannover . S. 134.

Kaiser, I, Poll, G & Vinolas, J 2020, 'Modelling the impact of structural flexibility of wheelsets and rails on the wheel-rail contact and the wear', Wear. doi.org/10.1016/j.wear.2020.203445

Kruse, J, Mildebrath, M, Budde, L, Coors, T, Faqiri, MY, Barroi, A, Stonis, M, Hassel, T, Pape, F, Lammers, M, Hermsdorf, J, Kaierle, S, Overmeyer, L & Poll, G 2020, 'Numerical simulation and experimental validation of the cladding material distribution of hybrid semi-finished products produced by deposition welding and cross-wedge rolling', Metals, Jg. 10, Nr. 10, 1336, S. 1-23. doi.org/10.3390/met10101336

Liu, H, Zhang, B, Bader, N, Poll, G & Venner, CH 2020, 'Influences of solid and lubricant thermal conductivity on traction in an EHL circular contact', Tribology International, Jg. 146, 106059. doi.org/10.1016/j.triboint.2019.106059

Liu, H, Zhang, B, Bader, N, Venner, CH & Poll, G 2020, 'Simplified traction prediction for highly loaded rolling/sliding EHL contacts', Tribology International, Jg. 148, 106335. doi.org/10.1016/j.triboint.2020.106335

Mallach, D, Pape, F, Lipinsky, D & Arlinghaus, HF 2020, 'ToF-SIMS analysis of boundary layers formed under zinc-free antiwear', Industrial Lubrication and Tribology, Jg. 72, Nr. 8, S. 1013-1017. doi.org/10.1108/ilt-10-2019-0436

Matthias, T, Heimes, N, Pape, F & Behrens, B-A 2020, Determination of the flow behavior of the joining zones of hybrid semi-finished products by means of nanoindentation. Düsseldorf, Germany, Nanobruecken 2020, Nanomechanical Testing Conference & Bruker Hysitron User Meeting.

Pape, F & Poll, G 2020, 'Investigations on graphene platelets as dry lubricant and as grease additive for sliding contacts and rolling bearing application', Lubricants, Jg. 8, Nr. 1, 3. doi.org/10.3390/lubricants8010003

Schöler, S, Schmieding, M, Heimes, N, Pape, F, Behrens, B-A, Poll, G & Möhwald, K 2020, 'Characterization of molybdenum based coatings on 100Cr6 bearing steel surfaces', Tribology Online, Jg. 15, Nr. 3, S. 181-185. doi.org/10.2474/TROL.15.181


Zeige Ergebnisse 1 - 20 von 120
1 2 3 4 5 6 Last