Zeige Ergebnisse 21 - 40 von 334
Ramteke, SM, Walczak, M, De Stefano, M, Ruggiero, A, Rosenkranz, A & Marian, M 2024, '2D materials for Tribo-corrosion and -oxidation protection: A review', Advances in Colloid and Interface Science, Jg. 331, 103243. https://doi.org/10.1016/j.cis.2024.103243
Mehr...
Rothammer, B, Feile, K, Werner, S, Frank, R, Bartz, M, Wartzack, S, Schubert, DW, Drummer, D, Detsch, R, Wang, B, Rosenkranz, A & Marian, M 2024, 'Ti3C2Tx-UHMWPE Nanocomposites: Towards an Enhanced Wear-Resistance of Biomedical Implants', Journal of Biomedical Materials Research - Part A, Jg. 113, Nr. 1, e37819. https://doi.org/10.1002/jbm.a.37819
Mehr...
Saure, F, Pape, F, Poll, G & Marian, M 2024, 'From Damage to Functionality: Remanufacturing of Thrust Roller Bearings by Tailored Forming', Advanced engineering materials. https://doi.org/10.1002/adem.202401393
Mehr...
Schneider, V, Krewer, M, Poll, G & Marian, M 2024, 'Effect of Harmful Bearing Currents on the Service Life of Rolling Bearings: From Experimental Investigations to a Predictive Model', Lubricants, Jg. 12, Nr. 7, 230. https://doi.org/10.3390/lubricants12070230
Mehr...
Shandhoosh, V, Venkatesh S, N, Chakrapani, G, Sugumaran, V, Ramteke, SM & Marian, M 2024, 'Intelligent fault diagnosis for tribo-mechanical systems by machine learning: Multi-feature extraction and ensemble voting methods', Knowledge-based systems, Jg. 305, 112694. https://doi.org/10.1016/j.knosys.2024.112694
Mehr...
Sun, J, Liu, C, Guo, F, Poll, G, Bai, L & Li, X 2024, '限量供油条件下微柱阵列束油表面润滑增效特性研究', Mocaxue Xuebao/Tribology, Jg. 44, Nr. 2, S. 117-128. https://doi.org/10.16078/j.tribology.2022217
Mehr...
Tomar, AK, Sahu, K, Sharma, SC & Marian, M 2024, 'Combined Effect of Surface Irregularities and Applied Voltage on the Behavior of Hole-Entry Spherical Hybrid Journal Bearings Lubricated With an Electro-Rheological Fluid', Journal of tribology, Jg. 146, Nr. 11, 114101. https://doi.org/10.1115/1.4065771
Mehr...
Tošić, M, Marian, M, Habchi, W, Lohner, T & Stahl, K 2024, 'Application of machine learning for film thickness prediction in elliptical EHL contact with varying entrainment angle', Tribology international, Jg. 199, 109940. https://doi.org/10.1016/j.triboint.2024.109940
Mehr...
Vivek, J, Venkatesh S, N, Mahanta, TK, V, S, Amarnath, M, Ramteke, SM & Marian, M 2024, 'Wear particle image analysis: feature extraction, selection and classification by deep and machine learning', Industrial Lubrication and Tribology, Jg. 76, Nr. 5, S. 599-607. https://doi.org/10.1108/ILT-12-2023-0414
Mehr...
Bayer, G, Bartschat, A, Wandel, S, Baust, S & Poll, G 2023, 'Experimental Investigations on Wear in Oscillating Grease-Lubricated Rolling Element Bearings of Different Size and Type', Lubricants, Jg. 11, Nr. 3, 120. https://doi.org/10.3390/lubricants11030120
Mehr...
Behrens, B-A, Stockburger, E, Wester, H, Poll, G, Pape, F, Konopka, D & Heimes, N 2023, 'Investigation of the Hardness Development of Molybdenum Coatings under Thermal and Tribological Loading', Lubricants, Jg. 11, Nr. 7, 283. https://doi.org/10.3390/lubricants11070283
Mehr...
Bodewig, A, Pape, F & Poll, G 2023, 'Investigation on the Influence of Residual Stresses due to Cold Forming on Stainless Steel Bearings', 48th Leeds-Lyon Symposium on Tribology, Leeds, Großbritannien / Vereinigtes Königreich, 5 Sept. 2023 - 7 Sept. 2023.
Mehr...
Budde, L, Biester, K, Coors, T, Faqiri, MY, Lammers, M, Hermsdorf, J, Hassel, T, Pape, F & Overmeyer, L 2023, 'Influence of shielding gas coverage during laser hot-wire cladding with high carbon steel', International Journal of Advanced Manufacturing Technology, Jg. 127, Nr. 7-8, S. 3195-3207. https://doi.org/10.1007/s00170-023-11350-z
Mehr...
Coors, T, Faqiri, Y, Saure, F, Pape, F, Hassel, T & Poll, G 2023, 'Wear of Tailored Forming Steels', Advanced engineering materials, Jg. 25, Nr. 13, 2201740. https://doi.org/10.1002/adem.202201740
Mehr...
Dechant, S, Poll, G, Rüth, L, Foko, FF & Koch, O 2023, Einfluss hoher Lasten auf das Ermüdungslebensdauerverhalten von Wälzlagern. in VDI Berichte. 2415 Aufl., VDI Berichte, Nr. 2415, Bd. 2023, VDI Verlag GmbH, Düsseldorf, S. 279-300. https://doi.org/10.51202/9783181024157-279
Mehr...
de la Presilla, R, Wandel, S, Stammler, M, Grebe, M, Poll, G & Glavatskih, S 2023, 'Oscillating rolling element bearings: A review of tribotesting and analysis approaches', Tribology international, Jg. 188, 108805. https://doi.org/10.1016/j.triboint.2023.108805
Mehr...
Denkena, B, Bergmann, B, Keitel, M, Wege, C, Poll, G, Kelley, J & Pape, F 2023, 'Process strategies for milling of dimples on tapered roller bearings', Production Engineering, Jg. 17, Nr. 6, S. 893–905. https://doi.org/10.1007/s11740-023-01208-4
Mehr...
Denkena, B, Liu, HC, Pape, F, Bergmann, B, Poll, G, Schenzel, J & Ellersiek, L 2023, 'Simulation of local contact conditions in the secondary shear zone in dry and wet metal cutting', Procedia CIRP, Jg. 117, S. 293-298. https://doi.org/10.1016/j.procir.2023.03.050
Mehr...
Fulari, GS 2023, 'Experimental investigation and finite element implementation of thermo-chemo-mechanical model in technical elastomers', Doktor der Ingenieurwissenschaften, Gottfried Wilhelm Leibniz Universität Hannover, Hannover.
Mehr...
Hwang, JI & Poll, G 2023, 'Fatigue life prediction of rolling bearings based on damage accumulation considering residual stresses', Tribologie und Schmierungstechnik, Jg. 70, Nr. 4-5, S. 32-39. https://doi.org/10.24053/TuS-2023-0021
Mehr...
