Matthias, T, Heimes, N, Pape, F & Behrens, B-A 2020, 'Determination of the flow behavior of the joining zones of hybrid semi-finished products by means of nanoindentation', Nanobrücken 2020, Düsseldorf, Deutschland, 4 Feb. 2020 - 6 Feb. 2020.
Mehr...
Pape, F, Coors, T & Poll, G 2020, 'Studies on the Influence of Residual Stresses on the Fatigue Life of Rolling Bearings in Dependence on the Production Processes', Frontiers in Mechanical Engineering, Jg. 6, 56. https://doi.org/10.3389/fmech.2020.00056
Mehr...
Pape, F, Coors, T, Matthias, T, Behrens, B & Poll, G 2020, Ultrasonic Evaluation of Tailored Forming Components. in JM Beswick (Hrsg.), Bearing Steel Technologies: 12th Volume, Progress in Bearing Steel Metallurgical Testing and Quality Assurance., STP162320190068, ASTM Special Technical Publication, Bd. STP 1623, ASTM International, S. 300-312. https://doi.org/10.1520/STP162320190068
Mehr...
Schöler, S, Schmieding, M, Heimes, N, Pape, F, Behrens, B-A, Poll, G & Möhwald, K 2020, 'Characterization of molybdenum based coatings on 100Cr6 bearing steel surfaces', Tribology Online, Jg. 15, Nr. 3, S. 181-185. https://doi.org/10.2474/TROL.15.181
Mehr...
Schwack, F, Bader, N, Leckner, J, Demaille, C & Poll, G 2020, 'A study of grease lubricants under wind turbine pitch bearing conditions', Wear, Jg. 454-455, 203335. https://doi.org/10.1016/j.wear.2020.203335
Mehr...
Schwack, F 2020, 'Untersuchungen zum Betriebsverhalten oszillierender Wälzlager am Beispiel von Rotorblattlagern in Windenergieanlagen', Doktor-Ingenieur(in) (Dr.-Ing.), Gottfried Wilhelm Leibniz Universität Hannover, Hannover. https://doi.org/10.15488/9756
Mehr...
Skubacz, T 2020, 'Experimentelle Untersuchungen zur Schmierstoff-Oberfächen-Wechselwirkung in nasslaufenden Reibsystemen am Beispiel von Synchronisierungen', Doktor-Ingenieur(in) (Dr.-Ing.), Gottfried Wilhelm Leibniz Universität Hannover, Hannover. <https://doi.org/10.15488/10313>
Mehr...
Stammler, M, Thomas, P, Reuter, A, Schwack, F & Poll, G 2020, 'Effect of load reduction mechanisms on loads and blade bearing movements of wind turbines', Wind Energy, Jg. 23, Nr. 2, S. 274-290. https://doi.org/10.1002/we.2428
Mehr...
Terwey, JT, Fourati, MA, Pape, F & Poll, G 2020, 'Energy-based modelling of adhesive wear in the mixed lubrication regime', Lubricants, Jg. 8, Nr. 2, 16. https://doi.org/10.3390/lubricants8020016
Mehr...
Terwey, JT 2020, 'Näherungslösungen für Reibung und Verschleiß in ölgeschmierten Wälzkontakten unter Berücksichtigung der realen Rheologie', Doktor-Ingenieur(in) (Dr.-Ing.), Gottfried Wilhelm Leibniz Universität Hannover, Hannover. <https://doi.org/10.15488/10299>
Mehr...
Behrens, BA, Chugreev, A, Matthias, T, Poll, G, Pape, F, Coors, T, Hassel, T, Maier, HJ & Mildebrath, M 2019, 'Manufacturing and Evaluation of Multi-Material Axial-Bearing Washers by Tailored Forming', Metals, Jg. 9, Nr. 2, 232. https://doi.org/10.3390/met9020232, https://doi.org/10.15488/4747
Mehr...
Bulut, D, Krups, T, Poll, G & Giese, U 2019, 'Lubricant compatibility of FKM seals in synthetic oils', Industrial Lubrication and Tribology, Jg. 72, Nr. 5, S. 557-565. https://doi.org/10.1108/ILT-02-2019-0065
Mehr...
Coors, T, Hwang, JI, Pape, F & Poll, G 2019, Theoretical investigations on the fatigue behavior of a tailored forming steel-aluminium bearing component. in Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019., 040020, AIP Conference Proceedings, Bd. 2113, American Institute of Physics Inc., 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019, Vitoria-Gasteiz, Spanien, 8 Mai 2019. https://doi.org/10.1063/1.5112554
Mehr...
Horn, M 2019, 'Untersuchungen zur praktischen Umsetzung von Elastomer-Lagersitzen in Hochdrehzahl-Traktionselektromotoren', Doktor-Ingenieur(in) (Dr.-Ing.), Gottfried Wilhelm Leibniz Universität Hannover, Hannover. https://doi.org/10.15488/8304
Mehr...
Hwang, JI, Coors, T, Pape, F & Poll, G 2019, 'Simulation of a steel-aluminum composite material subjected to rolling contact fatigue', Lubricants, Jg. 7, Nr. 12, 109. https://doi.org/10.3390/LUBRICANTS7120109, https://doi.org/10.15488/10893
Mehr...
Kaiser, I, Poll, G, Voss, G & Vinolas, J 2019, 'The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle', Vehicle System Dynamics, Jg. 57, Nr. 4, S. 564-594. https://doi.org/10.1080/00423114.2018.1484933
Mehr...
Konopka, D, Pape, F, Heimes, N, Matthias, T, Schöler, S, Möhwald, K, Behrens, B-A & Poll, G 2019, Micro- and nanotribological characterization of molybdenum oxide based coatings on 100CR6 bearing steel surfaces. in Proceedings of 10th International Scientific Conference BALTTRIB 2019. S. 308-315, 10th International Scientific Conference BALTTRIB 2019, Kaunas, Litauen, 14 Nov. 2019. https://doi.org/10.15544/balttrib.2019.49
Mehr...
Liu, HC, Zhang, BB, Bader, N, Guo, F, Poll, G & Yang, P 2019, 'Crucial role of solid body temperature on elastohydrodynamic film thickness and traction', Tribology International, Jg. 131, S. 386-397. https://doi.org/10.1016/j.triboint.2018.11.006
Mehr...
Mohnfeld, N, Pape, F, Poll, G, Konopka, D, Schöler, S, Möhwald, K & Behrens, B-A 2019, Characterisation of Self-Regenerative Dry Lubricated Layers on Mo-Basis by Nano Mechanical Testing. in JP Wulfsberg, W Hintze & B-A Behrens (Hrsg.), Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. 1. Aufl., Springer Vieweg, Berlin, Heidelberg, S. 139-148, 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, Deutschland, 30 Sept. 2019. https://doi.org/10.1007/978-3-662-60417-5_14
Mehr...
Pape, F, Petzold, M & Poll, G 2019, 'Computational investigation of crack inducing forces on bearing surfaces regarding the tribofilm structure', International Journal of Computational Methods and Experimental Measurements, Jg. 7, Nr. 4, S. 340-349. https://doi.org/10.2495/CmEm-V7-n4-340-349
Mehr...
